Call Us Anytime

Amped Plumbing Blog · Plumbing Tips

DIY Plumbing vs. Calling a Plumber: What Is Safe to Do Yourself

By Joe Norton, Owner, Amped Plumbing · Warr Acres, OK · OK Plumbing Contractor Lic #049194
Reviewed by Mickey Lyons, licensed plumbing contractor
Updated November 17, 2026

Short answer: Do it yourself when the job is on your side of a shutoff valve, needs no special tools, and cannot flood the house if it goes wrong: plunging a clog, replacing a toilet flapper, changing a faucet aerator or shower head. Call a licensed plumber for gas lines, water heaters, sewer lines, anything inside a wall or under a slab, and any leak you cannot find.

Jobs most homeowners can do

  • Clearing a toilet or sink clog with a plunger; see how to use a plunger.
  • Pulling hair out of a shower drain.
  • Replacing a toilet flapper or fill valve.
  • Cleaning or replacing a faucet aerator or shower head.
  • Tightening a loose supply line nut.
  • Insulating exposed pipes and covering outdoor faucets.
  • Testing for leaks; see how to check for a hidden water leak.

Jobs that should go to a plumber

  • Anything involving gas. Water heaters, gas lines, gas appliances.
  • Water heater repair or replacement. Gas, electricity, pressure and venting all in one appliance.
  • Main sewer line problems. They need a professional machine and a camera.
  • Leaks inside walls, ceilings or under the slab.
  • Moving or adding pipes. Usually requires a permit and inspection.
  • Repeated clogs. The cause is deeper than a plunger reaches.
  • Anything where you cannot find the shutoff.
Licensed Amped Plumbing tech working under a kitchen sink

Before you start any repair

  1. Know where the shutoff for that fixture is, and where the main is.
  2. Shut the water off and open the faucet to confirm it is off.
  3. Have a bucket and towels ready.
  4. Take a photo before you take anything apart.
  5. Do not over-tighten plastic fittings.

Common DIY mistakes

  • Using chemical drain cleaner on a full blockage.
  • Over-tightening a fitting until it cracks.
  • Mixing pipe materials without the right connector.
  • Forgetting to turn off power or gas to a water heater.
  • Patching a leak without finding out why the pipe failed.

When to stop and call

Stop if water will not shut off, if you smell gas, if the leak is inside a wall, or if the repair has not worked after a reasonable try. In Oklahoma, plumbing work for hire must be done by a licensed plumber, and a licensed contractor carries insurance for the work. Amped Plumbing holds OK License #049194. In an emergency, start with the plumbing emergency checklist.

Job bigger than you expected?

Amped Plumbing can take it from here, anywhere in the Oklahoma City metro.

Common questions

What plumbing can I do myself?

Plunging clogs, replacing a toilet flapper, swapping an aerator or shower head and similar jobs that are downstream of a shutoff valve and need no special tools.

Is it safe to replace my own water heater?

It is not recommended. Water heaters combine gas or high-voltage electricity, pressure and venting, and installation usually requires a permit.

When should I call a plumber instead of fixing it myself?

For gas, water heaters, sewer lines, leaks inside walls or under floors, repeated clogs, and any time you cannot shut the water off.

About the author: Joe Norton is the owner of Amped Plumbing. He started the business in 2008, working out of a single truck, and built it on hard work and word of mouth. More about Amped Plumbing.

Amped Plumbing is a licensed plumbing company (OK Plumbing Contractor License #049194, held by Mickey Lyons) based in Warr Acres and serving the Oklahoma City metro, including Edmond, Moore, Yukon, Norman, Bethany and Nichols Hills.

Need cameras or an alarm system? Visit Amped Security →