Call Us Anytime

Amped Plumbing Blog · Drain and Sewer

How to Unclog a Drain: What Works and What Does Not

By Joe Norton, Owner, Amped Plumbing · Warr Acres, OK · OK Plumbing Contractor Lic #049194
Reviewed by Mickey Lyons, licensed plumbing contractor
Updated November 17, 2026

Short answer: Start with the simplest thing that works: clean the stopper, then plunge, then use a plastic drain strip or a hand auger. Those clear most clogs near the fixture. Chemical drain cleaners are the least effective and the hardest on pipes. If the drain is still blocked, or more than one drain is slow, it needs professional cleaning.

1. Clean the stopper or strainer (works)

In bathroom sinks and tubs, most of the clog is hair wrapped around the stopper. Pull it, clean it, run hot water. Costs nothing and often fixes it.

2. Plunge it (works)

Use a cup plunger on sinks and tubs and a flange plunger on toilets. Cover the overflow hole with a wet rag, have water over the cup, and pump 15 to 20 times. Full steps: how to use a plunger.

3. Plastic drain strip (works on hair)

A thin barbed plastic strip pushed into a shower or sink drain pulls hair clogs out. Cheap and effective for bathroom drains.

Amped Plumbing tech working on a sink drain

4. Hand auger (works on nearby clogs)

A small hand-cranked cable reaches a few feet into the pipe and breaks up or retrieves a clog. Use a toilet auger, not a sink auger, on a toilet so the bowl is not scratched.

5. Hot water and dish soap (sometimes)

Helps with a fresh grease clog in a kitchen sink. Use hot tap water, not boiling, which can damage plastic pipe and porcelain.

6. Baking soda and vinegar (rarely)

The fizz looks busy but has little force. It can freshen a slow drain; it will not clear a real blockage.

7. Chemical drain cleaners (not recommended)

  • They generate heat that can damage older pipes and soften plastic.
  • They are dangerous if they splash, and worse if someone plunges afterward.
  • They sit in standing water and often never reach the clog.
  • They leave caustic water in the pipe for whoever works on it next.

8. Professional drain cleaning (works when the rest does not)

A cable machine reaches far past where home tools stop and removes the clog instead of poking a hole in it. Hydro jetting cleans grease off the pipe wall. See drain cleaning, and hydro jetting vs. drain snaking for which one fits.

When to stop trying

  • Two or three attempts have not worked.
  • The clog returns within days.
  • More than one drain is slow, or water comes up in a tub or floor drain. That is the main line; see how bad is your clog.
Tried it all and still clogged?

Amped Plumbing clears drains across the Oklahoma City metro. Check the current drain coupons before you book.

Common questions

What is the best way to unclog a drain?

Clean the stopper, then plunge, then use a drain strip or hand auger. If those fail, the clog needs a professional cable machine.

Does baking soda and vinegar unclog drains?

Not a real blockage. It may freshen a slow drain, but it does not have the force to remove a clog.

Is it safe to pour boiling water down a drain?

Use hot tap water instead. Boiling water can soften plastic drain pipe and crack porcelain.

About the author: Joe Norton is the owner of Amped Plumbing. He started the business in 2008, working out of a single truck, and built it on hard work and word of mouth. More about Amped Plumbing.

Amped Plumbing is a licensed plumbing company (OK Plumbing Contractor License #049194, held by Mickey Lyons) based in Warr Acres and serving the Oklahoma City metro, including Edmond, Moore, Yukon, Norman, Bethany and Nichols Hills.

Need cameras or an alarm system? Visit Amped Security →