Call Us Anytime

Amped Plumbing Blog · Water Leak Detection

Slab Leaks in Oklahoma City: Causes and Repair Options

By Joe Norton, Owner, Amped Plumbing · Warr Acres, OK · OK Plumbing Contractor Lic #049194
Reviewed by Mickey Lyons, licensed plumbing contractor
Updated November 17, 2026

Short answer: Slab leaks are common in Oklahoma City because many homes have water lines under a concrete slab that sits on clay soil. The soil swells and shrinks with the weather and stresses the pipes. A slab leak is repaired one of three ways: open the slab and fix that spot, reroute the line through the walls or attic, or repipe the house.

What causes slab leaks here

  • Shifting clay soil. It shrinks in drought and swells after rain, which moves the slab and the pipes under it.
  • Corrosion. Copper lines in contact with soil and concrete thin out over decades.
  • Abrasion. A pipe that rubs against concrete or gravel every time water runs wears through, especially on hot lines that expand and contract.
  • High water pressure.
  • Age and original workmanship.

Step one is locating it

The pipe is under concrete, so the first job is finding the exact spot without breaking up the floor. That is done with acoustic listening equipment and tracer gas; see water leak detection. The signs that lead people to call are in warning signs of a slab leak.

Amped Plumbing tech locating a leak inside a home

Repair option 1: spot repair

The slab is opened at the leak, the damaged section is replaced, and the floor is patched.

Good for: a first leak in pipe that is otherwise in decent shape, in a spot that is easy to reach.

Drawback: flooring has to be removed and repaired, and it fixes only that spot.

Repair option 2: reroute

The leaking line under the slab is cut off and abandoned, and a new line is run through the walls or attic to the same fixtures.

Good for: leaks under finished flooring or cabinets, and lines that have leaked before.

Drawback: some drywall access, and attic lines need insulation.

Repair option 3: repipe

All the water lines are replaced, with nothing left under the slab.

Good for: a second or third slab leak, or old pipe failing in several places.

See pipe repair vs. whole-house repiping for how to weigh it, and whole-house repiping for what the job involves.

What to do while you wait

  • Shut the water off at the main when you are not using it.
  • Turn off the water heater if the leak is on the hot side.
  • Take photos of any damage for insurance.

Details of how we handle these are on the slab leak locate and repair page.

Dealing with a slab leak?

Amped Plumbing locates the leak and gives you the repair options with the reasons for each.

Common questions

Why are slab leaks common in Oklahoma?

Many homes have water lines under a concrete slab on clay soil that swells and shrinks with moisture, which stresses the pipes over time.

What is the best way to fix a slab leak?

It depends on the pipe. A spot repair suits a first leak in sound pipe. A reroute or repipe makes more sense when the line has leaked before or the pipe is worn out.

Does insurance cover slab leak repair?

Policies vary. Many cover the resulting water damage and access to the pipe but not the pipe repair itself. Check with your insurance company.

About the author: Joe Norton is the owner of Amped Plumbing. He started the business in 2008, working out of a single truck, and built it on hard work and word of mouth. More about Amped Plumbing.

Amped Plumbing is a licensed plumbing company (OK Plumbing Contractor License #049194, held by Mickey Lyons) based in Warr Acres and serving the Oklahoma City metro, including Edmond, Moore, Yukon, Norman, Bethany and Nichols Hills.

Need cameras or an alarm system? Visit Amped Security →