Amped Plumbing Blog · Water Leak Detection
Pipe Repair vs. Whole-House Repiping: Which Do You Need?
When a repair is the right call
- It is the first leak the house has had.
- The cause is clear and local: a failed fitting, a nail through a pipe, a frozen section.
- The rest of the pipe looks healthy when the plumber opens the wall.
- The pipe is copper or PEX with years of life left.
A repair replaces the damaged section and you are done.
When repiping makes more sense
- Leaks keep happening in different places.
- The water is rusty or discolored, which means the pipe is corroding from the inside.
- Pressure is low everywhere, not at one faucet.
- The pipe is galvanized steel, which rusts shut with age.
- The pipe is polybutylene, a gray plastic used from the late 1970s to the mid 1990s that is known to fail.
- You have had more than one slab leak.
In these cases each repair fixes one spot on a pipe that is worn out along its whole length. Our guide to whole-house repiping explains how the job is done.

The middle option: a reroute or partial repipe
Sometimes one line is the problem. A leaking line under the slab can be abandoned and a new line run through the walls or attic instead. A single bathroom or one branch can be repiped without touching the rest of the house. This is common after a first slab leak.
What to compare
Cost now against cost over time. A repair is cheaper today. Add up several repairs, plus drywall, flooring and water damage each time, and repiping often wins.
Disruption. A repair takes hours. A repipe takes days, but it is planned, and water is normally back on each evening.
Risk. Old pipe that has leaked twice will leak again, and the next one may be while you are out of town.
How to find out which you need
The pipe itself answers the question. A plumber can check the pipe material and its condition where it is exposed, look at the piece that failed, and tell you whether the damage is local or general. If you suspect a leak you cannot see, water leak detection finds it first. Then you can compare a repair quote and a repiping quote side by side.
Amped Plumbing will look at your pipes and give you the options, with the reasons for each, before any work starts.
Common questions
How many leaks before I should repipe?
There is no fixed number, but two or three leaks in different places within a few years is a strong sign the pipe is worn out and repiping will cost less than more repairs.
Can you repipe just part of a house?
Yes. One branch, one bathroom or one line under the slab can be replaced or rerouted without repiping the whole home.
How do I know what kind of pipe I have?
Look where the pipe is exposed, such as at the water heater or under a sink. Copper is reddish-brown metal, galvanized is dull gray metal with threaded joints, PEX is flexible red, blue or white plastic, and polybutylene is flexible gray plastic.
Amped Plumbing is a licensed plumbing company (OK Plumbing Contractor License #049194, held by Mickey Lyons) based in Warr Acres and serving the Oklahoma City metro, including Edmond, Moore, Yukon, Norman, Bethany and Nichols Hills.