Call Us Anytime

Amped Plumbing Blog · Water Leak Detection

Why Is My Water Bill So High All of a Sudden?

By Joe Norton, Owner, Amped Plumbing · Warr Acres, OK · OK Plumbing Contractor Lic #049194
Reviewed by Mickey Lyons, licensed plumbing contractor
Updated November 17, 2026

Short answer: A water bill that jumps without a change in habits is almost always a leak. The most common cause is a running toilet, followed by a leak in the sprinkler system, a dripping faucet or water heater valve, and a hidden leak in a wall or under the slab. A five-minute check at the water meter tells you whether water is escaping.

First, check the meter

  1. Turn off every faucet and appliance, and make sure no one uses water.
  2. Find the water meter, usually in a box near the street.
  3. Look at the small leak indicator, or write down the numbers.
  4. Wait 20 to 30 minutes.
  5. If the indicator turned or the reading changed, water is leaking somewhere.

If the meter does not move, the higher bill is from use: a pool fill, new sod, guests, or a rate change.

The usual causes

A running toilet. The top cause by far. A worn flapper lets water run from the tank into the bowl around the clock, often silently. Put food coloring in the tank and wait 15 minutes; color in the bowl confirms it.

Sprinkler system. A broken head or cracked line underground can waste a great deal of water each cycle. Look for soggy spots and heads that bubble.

Dripping faucets and outdoor faucets. Small, but constant.

Water heater relief valve. A valve that drips into its discharge pipe.

Water softener stuck in regeneration. It sends water to the drain continuously.

A hidden leak in a wall, under a floor or under the slab. No visible water, but the meter keeps turning.

Amped Plumbing tech checking a bathroom for a hidden leak

Narrowing it down

  • Shut the valve behind each toilet, one at a time, and recheck the meter. If it stops, that toilet is the leak.
  • Shut off the sprinkler system at its valve and recheck.
  • Shut the valve to the water heater and recheck. If the meter stops, the leak is on the hot side.
  • If the meter still moves with all of those off, the leak is in the piping itself.

When it is a hidden leak

Signs that go with it: a warm spot on the floor, the sound of water with everything off, damp flooring, or a musty smell. Warning signs of a slab leak covers these. Finding the exact spot takes equipment; see water leak detection. How to check for a hidden water leak has more tests you can do first.

Ask about a bill adjustment

Many water utilities will adjust a bill once a leak has been repaired, if you send proof of the repair. Call your city utility and ask what they need. Keep the plumber’s invoice.

Meter moving with everything off?

Amped Plumbing locates hidden leaks with acoustic and tracer-gas equipment across the Oklahoma City metro.

Common questions

What is the most common cause of a high water bill?

A running toilet. A leaking flapper can waste hundreds of gallons a day without making much noise.

How do I know if I have a water leak?

Turn off all water and watch the meter for 20 to 30 minutes. If it moves, there is a leak.

Will the water company lower my bill after a leak?

Many utilities offer a leak adjustment once the repair is made and documented. Ask your city utility about its policy.

About the author: Joe Norton is the owner of Amped Plumbing. He started the business in 2008, working out of a single truck, and built it on hard work and word of mouth. More about Amped Plumbing.

Amped Plumbing is a licensed plumbing company (OK Plumbing Contractor License #049194, held by Mickey Lyons) based in Warr Acres and serving the Oklahoma City metro, including Edmond, Moore, Yukon, Norman, Bethany and Nichols Hills.

Need cameras or an alarm system? Visit Amped Security →