Call Us Anytime

Amped Plumbing Blog · Water Leak Detection

How Early Water Leak Detection Prevents Major Damage

By Joe Norton, Owner, Amped Plumbing · Warr Acres, OK · OK Plumbing Contractor Lic #049194
Reviewed by Mickey Lyons, licensed plumbing contractor
Published May 26, 2025 · Updated November 17, 2026

Short answer: A small hidden leak can run for weeks, soaking framing, flooring and the soil under a slab before any water shows. Finding it early keeps the repair to one section of pipe instead of pipe plus drywall, flooring and mold cleanup. The early signs are a rising water bill, a meter that moves with everything off, and damp or musty spots.

What a hidden leak does over time

  • Water bill. Even a pinhole leak runs around the clock.
  • Building materials. Drywall, wood framing, subfloor and cabinets soak it up and swell, stain or rot.
  • Mold. It can start growing in damp material within days.
  • Foundation. A leak under a slab washes out or swells the soil that supports it.

The pipe repair is usually the small part of the bill. The damage around it is the large part, and that grows every day the leak runs.

Early signs to watch for

  • A water bill that climbs with no change in how you use water.
  • The sound of water running when everything is off.
  • A damp, warm or discolored spot on a floor, wall or ceiling.
  • A musty smell in one room or cabinet.
  • Paint or wallpaper bubbling.
  • A drop in water pressure.
  • A patch of lawn that is greener or wetter than the rest.
Amped Plumbing tech checking a bathroom for a hidden water leak

Check it yourself with the water meter

  1. Turn off every faucet and appliance, and make sure no toilet is running.
  2. Find the meter, usually in a box near the street.
  3. Watch the leak indicator, or write down the reading.
  4. Wait 20 to 30 minutes without using water.
  5. If the indicator moved or the number changed, you have a leak.

Toilets are the most common culprit. Put a few drops of food coloring in the tank and wait 15 minutes without flushing. Color in the bowl means the flapper is leaking.

How a hidden leak is located

Guessing means opening walls and floors until the leak turns up. Leak detection equipment narrows it to the spot first. Amped Plumbing uses acoustic listening equipment to hear water escaping from a pressurized line, and tracer gas to find leaks that are too quiet to hear. Then only that spot is opened. See water leak detection for the details.

What to do if you find one

  1. Shut the water off at the main when you are not using it, to stop the damage.
  2. Take photos of any wet or stained areas.
  3. Have the leak located and repaired.
  4. Dry the area fully before closing it up.

A leak under the floor is covered on our slab leak page and in warning signs of a slab leak.

Think you have a hidden leak?

Amped Plumbing locates hidden water leaks across the Oklahoma City metro and explains the repair before any work starts.

Common questions

How can I tell if I have a hidden water leak?

Turn off all water and watch the water meter. If it keeps moving, there is a leak. A rising bill, damp spots and a musty smell are the other common signs.

How much water does a small leak waste?

More than most people expect, because it never stops. A steady drip or pinhole leak adds up to thousands of gallons over a year.

Does leak detection damage my home?

No. Acoustic and tracer-gas equipment locate the leak from the surface, so the only opening made is at the leak itself.

About the author: Joe Norton is the owner of Amped Plumbing. He started the business in 2008, working out of a single truck, and built it on hard work and word of mouth. More about Amped Plumbing.

Amped Plumbing is a licensed plumbing company (OK Plumbing Contractor License #049194, held by Mickey Lyons) based in Warr Acres and serving the Oklahoma City metro, including Edmond, Moore, Yukon, Norman, Bethany and Nichols Hills.

Need cameras or an alarm system? Visit Amped Security →