Call Us Anytime

Amped Plumbing Blog · Drain and Sewer

Sewer Line Repair Methods: Spot Repair, Replacement and What to Ask

By Joe Norton, Owner, Amped Plumbing · Warr Acres, OK · OK Plumbing Contractor Lic #049194
Reviewed by Mickey Lyons, licensed plumbing contractor
Updated November 17, 2026

Short answer: A sewer line problem is fixed one of three ways. Cleaning clears a blockage in sound pipe. A spot repair replaces one damaged section. Full replacement is for a line that is failing along its length or has lost its slope. A camera inspection decides which one you need, and a good sewer repair company shows you that footage before quoting.

Cleaning

What it fixes: blockages from roots, grease, paper and debris in a pipe that is still intact.

How: a cable machine through the cleanout, and hydro jetting when grease or heavy roots are involved. See sewer line cleaning.

Limit: it does not fix a broken pipe. If roots are getting in, they will be back.

Spot repair

What it fixes: one bad place: a crack, a separated joint, a short crushed section, a root entry point.

How: the line is located and marked, the ground is opened at that spot, the damaged section is cut out and replaced, and the repair is tested.

Right when: the camera shows the rest of the line is in good shape.

Amped Plumbing tech hand-digging a sewer trench

Full replacement

What it fixes: a line that is damaged in several places, has sagged and lost its slope, or is made of old pipe that is failing along its length.

How: the old line is replaced from the house to the connection, with new cleanouts, proper slope and bedding, then inspected.

Right when: repairs would have to be made in several places, or the line has been repaired before and failed again.

Under the house

When the damaged section is under the slab, it can be reached by opening the floor or by tunneling under the house from outside. Which one is used depends on where the pipe is and what is above it. After pipe is replaced under a slab, a hydrostatic test confirms the system holds water.

What causes the damage

Roots, age, and soil that moves. In central Oklahoma, clay soil swelling and shrinking is a major cause; so is foundation work that shifts the pipes. See why sewer lines break under Oklahoma homes.

How to choose a sewer repair company

  • They inspect with a camera and show you the footage.
  • They can explain why they recommend a repair or a replacement.
  • They hold an Oklahoma plumbing license and carry insurance.
  • They pull the permit and have the work inspected.
  • They put the scope and warranty in writing.

How to compare sewer replacement estimates has the full list of questions. Details of our process are on sewer line repair and replacement.

Need a sewer line looked at?

Amped Plumbing inspects with a camera, shows you the problem and quotes the repair that fits it.

Common questions

Can a sewer line be repaired without replacing the whole thing?

Yes, when the damage is in one place and the rest of the line is sound. A camera inspection shows whether that is the case.

How do I know if my sewer line needs to be replaced?

Repeated backups, damage in several places, or a line that has sagged or been repaired before are the usual reasons. The camera footage will show it.

How long does a sewer line repair take?

A spot repair is often done in a day. A full replacement commonly takes a few days, depending on depth, length and what is above the line.

About the author: Joe Norton is the owner of Amped Plumbing. He started the business in 2008, working out of a single truck, and built it on hard work and word of mouth. More about Amped Plumbing.

Amped Plumbing is a licensed plumbing company (OK Plumbing Contractor License #049194, held by Mickey Lyons) based in Warr Acres and serving the Oklahoma City metro, including Edmond, Moore, Yukon, Norman, Bethany and Nichols Hills.

Need cameras or an alarm system? Visit Amped Security →