Call Us Anytime

Amped Plumbing Blog · Drain and Sewer

Benefits of Hydro Jetting for Drain and Sewer Lines

By Joe Norton, Owner, Amped Plumbing · Warr Acres, OK · OK Plumbing Contractor Lic #049194
Reviewed by Mickey Lyons, licensed plumbing contractor
Updated November 17, 2026

Short answer: Hydro jetting cleans drain and sewer lines with high-pressure water. Its main benefits are that it removes buildup from the whole pipe wall instead of punching a hole through a clog, it clears grease and roots that a cable leaves behind, and the line stays clear much longer. It is used on drain and sewer pipes, not on the water supply lines that feed your faucets.

What hydro jetting is

A hose with a specially drilled nozzle is fed into the drain or sewer line through a cleanout. A pump sends water through it at very high pressure. Jets pointing backward pull the hose down the line and wash debris out behind it; a jet pointing forward breaks up the blockage ahead. See the equipment on our hydro jetting page.

The benefits

  • It cleans the whole pipe. A cable opens a path. Jetting scours the wall back to nearly its full diameter.
  • It removes grease. Grease is the main reason kitchen and restaurant lines clog again after cabling.
  • It flushes out roots and sludge after they are cut.
  • The result lasts. With the buildup gone, there is less for new debris to catch on.
  • No chemicals. It is only water.
  • It prepares a line for a camera. A clean pipe is easier to inspect.
Amped Plumbing hydro jetter trailer and van at a job site

What it is best for

  • Kitchen lines that clog again and again.
  • Main sewer lines with grease or heavy scale.
  • Lines with recurring roots, alongside cutting.
  • Restaurants and commercial kitchens, usually on a schedule.
  • Before a sewer repair, so the full condition of the pipe can be seen.

When it should not be used

Jetting needs a pipe that can take the pressure. On pipe that is cracked, collapsed or badly corroded it can make things worse, and it cannot fix a broken pipe in any case. That is why a sewer camera inspection comes first when a line’s condition is unknown. If the camera shows damage, the answer is repair or replacement, not cleaning.

Jetting or cabling?

For a first-time clog, a cable is usually enough and costs less. For grease, sludge and repeat clogs, jetting is the better tool. Hydro jetting vs. drain snaking compares them side by side.

How often

Most homes do not need jetting on a schedule. It is done when a line needs it. Homes with heavy root growth or a long history of grease clogs, and commercial kitchens, benefit from doing it periodically before the line blocks.

Line keeps clogging after it is snaked?

Amped Plumbing can jet it clean and show you the result on camera.

Common questions

What are the benefits of hydro jetting?

It cleans the full inside of the pipe, removes grease and roots a cable leaves behind, uses no chemicals, and keeps the line clear longer.

Is hydro jetting used on water lines?

No. It is for drain and sewer lines. Water supply lines are pressurized pipes that are repaired or replaced, not jetted.

Is hydro jetting safe for old pipes?

It is safe for pipes in sound condition. Older or damaged lines should be camera-inspected first.

About the author: Joe Norton is the owner of Amped Plumbing. He started the business in 2008, working out of a single truck, and built it on hard work and word of mouth. More about Amped Plumbing.

Amped Plumbing is a licensed plumbing company (OK Plumbing Contractor License #049194, held by Mickey Lyons) based in Warr Acres and serving the Oklahoma City metro, including Edmond, Moore, Yukon, Norman, Bethany and Nichols Hills.

Need cameras or an alarm system? Visit Amped Security →