Call Us Anytime

Amped Plumbing Blog · Drain and Sewer

Hydro Jetting vs. Drain Snaking: Which One Do You Need?

By Joe Norton, Owner, Amped Plumbing · Warr Acres, OK · OK Plumbing Contractor Lic #049194
Reviewed by Mickey Lyons, licensed plumbing contractor
Updated November 17, 2026

Short answer: Snaking uses a rotating steel cable to break through a clog. Hydro jetting uses high-pressure water to scour the whole inside of the pipe. Snaking is the right first step for most single clogs. Jetting is the better choice for grease, sludge, heavy roots and clogs that keep coming back.

How snaking works

A flexible steel cable with a cutting head is fed into the drain and spun by a machine. It bores through the blockage, breaks it up and pulls some of it back. It is quick, works on almost any pipe, and handles hair, paper, small objects and roots.

Its limit: it opens a path through the clog. Grease and sludge left on the pipe wall stay there.

How hydro jetting works

A hose with a special nozzle is fed into the line. Water at very high pressure shoots forward to break up the blockage and backward to wash the debris out. It cleans the full width of the pipe, not just a hole through the middle. See hydro jetting for the equipment we use.

Its limit: it should only be used on pipe that is in sound condition.

Amped Plumbing hydro jetter trailer and van on a job

Which clogs need which

  • A single slow sink, tub or toilet: snaking.
  • A main line blocked for the first time: snaking, then a camera if it happens again.
  • Kitchen lines coated with grease: jetting.
  • Roots: a cable to cut them, jetting to wash them out.
  • Clogs that return after snaking: jetting.
  • Restaurant and commercial lines: jetting, usually on a schedule.

Why a camera sometimes comes first

On a line with repeated problems, a sewer camera inspection shows what is really in there. If the pipe is cracked or collapsed, neither method fixes it, and jetting could make it worse. If it is intact but dirty, jetting is the answer. What a camera inspection shows explains more.

Cost and how long it lasts

Snaking costs less and is faster. Jetting costs more but the line stays clear much longer, because the buildup is actually removed. For a first clog, snaking is usually enough. For a line you have had snaked more than once in a year, jetting tends to be the cheaper choice over time.

Drain keeps clogging?

Amped Plumbing does both, and can tell you which one your line needs after a look.

Common questions

Is hydro jetting better than snaking?

It cleans more thoroughly, but it is not always needed. Snaking is fine for most single clogs. Jetting is better for grease, sludge and repeat clogs.

Can hydro jetting damage pipes?

Not sound ones. On cracked, collapsed or badly corroded pipe it can, which is why the line is checked first when its condition is in doubt.

How long does hydro jetting last?

Often a year or more for a home, depending on what goes down the drain and whether roots are involved.

About the author: Joe Norton is the owner of Amped Plumbing. He started the business in 2008, working out of a single truck, and built it on hard work and word of mouth. More about Amped Plumbing.

Amped Plumbing is a licensed plumbing company (OK Plumbing Contractor License #049194, held by Mickey Lyons) based in Warr Acres and serving the Oklahoma City metro, including Edmond, Moore, Yukon, Norman, Bethany and Nichols Hills.

Need cameras or an alarm system? Visit Amped Security →