Call Us Anytime

Amped Plumbing Blog · Plumbing Tips

Home Plumbing Inspection Checklist

By Joe Norton, Owner, Amped Plumbing · Warr Acres, OK · OK Plumbing Contractor Lic #049194
Reviewed by Mickey Lyons, licensed plumbing contractor
Updated November 17, 2026

Short answer: A home plumbing inspection checks seven areas: the main shutoff and water meter, the water heater, the kitchen, each bathroom, the laundry area, outdoor plumbing, and the drains and sewer line. Most of it you can do yourself in under an hour. The sewer line and any hidden leaks need a plumber’s equipment.

1. Main shutoff and water meter

  • Find the main water shutoff and make sure it turns.
  • With all water off, check the meter. If the leak indicator moves, there is a leak.
  • Check water pressure with a gauge on an outdoor faucet. Around 40 to 80 psi is the normal range; higher strains pipes and appliances.

2. Water heater

  • Look for rust, moisture or drips at the tank, the fittings on top and the relief valve pipe.
  • Listen for popping or rumbling, a sign of sediment.
  • Check the age on the label. Tank heaters commonly last 8 to 12 years.
  • Make sure the area around a gas heater is clear.

A yearly water heater tune-up covers the flush and the safety checks.

3. Kitchen

  • Run the faucet and look under the sink for drips at the supply lines, the drain and the disposal.
  • Check that the sink drains quickly.
  • Look at the dishwasher and refrigerator water lines for kinks or moisture.
  • Check the cabinet floor for stains or swelling.
Amped Plumbing tech inspecting plumbing under a kitchen sink

4. Bathrooms

  • Flush each toilet. It should clear in one flush, refill, and stop running.
  • Press on the toilet. It should not rock. See clogged toilet or bad toilet flange.
  • Look for water or stains around the toilet base.
  • Run the sink, tub and shower and watch how fast they drain.
  • Check caulk and grout around the tub and shower.
  • Look at the ceiling below an upstairs bathroom for stains.

5. Laundry area

  • Check the washing machine hoses for bulges, cracks or rust at the fittings. Rubber hoses should be replaced every few years.
  • Make sure the drain does not overflow when the washer empties.

6. Outside

  • Turn on each outdoor faucet and check for leaks at the handle and the wall.
  • Walk the yard for soggy spots or unusually green strips.
  • Find the sewer cleanout and make sure the cap is in place.

7. Drains and sewer line

  • Note any drain that is slow, gurgles or smells.
  • More than one slow drain points to the main line.

You cannot see inside the sewer line yourself. A sewer camera inspection shows roots, cracks and low spots, and it is especially worth doing before buying a home.

What to do with what you find

Drips, a running toilet and slow single drains are small repairs. A moving meter with everything off, stains with no obvious source, a rocking toilet, or several slow drains should be looked at by a plumber. For a leak you cannot locate, see water leak detection.

Found something on the list?

Amped Plumbing can inspect, find the cause and fix it, anywhere in the Oklahoma City metro.

Common questions

How often should home plumbing be inspected?

A walk-through like this once a year catches most problems early. Have a plumber look sooner if you see stains, a rising water bill or more than one slow drain.

What should a plumbing inspection include before buying a house?

Everything on this checklist, plus a sewer camera inspection and a check of the water heater age and the type of water pipe in the house.

What is normal water pressure for a house?

Between about 40 and 80 psi. Pressure above that range wears out pipes, fixtures and appliances, and is corrected with a pressure-reducing valve.

About the author: Joe Norton is the owner of Amped Plumbing. He started the business in 2008, working out of a single truck, and built it on hard work and word of mouth. More about Amped Plumbing.

Amped Plumbing is a licensed plumbing company (OK Plumbing Contractor License #049194, held by Mickey Lyons) based in Warr Acres and serving the Oklahoma City metro, including Edmond, Moore, Yukon, Norman, Bethany and Nichols Hills.

Need cameras or an alarm system? Visit Amped Security →